Skip to main content
Fortis Industrial
tesa® 88026 – tesa product image
tesa

tesa® 88026

2.6 mm (102 mil) tesaprint® Cushioning Foam

  • BackingPE foam
  • AdhesiveAcrylic
Request QuoteWhatsApp for a quoteDownload TDS (PDF, tesa 16/02/24)

Call us:(603) 8073 2667(603) 8073 2688

Description

tesa® 88026 is a grey closed-cell PE foam, equipped with an acrylic adhesive, covered by a blue film liner.

It is especially designed to add a compressible layer to the compound of printing plate and carrier film when printing directly on corrugated board (Flexo post-print).

To use our tesaprint® Cushioning Foams, simply cut off the required foam size and remove the film liner to adhere the foam to the backside of your carrier film, after you have finished the printing plate mounting.

Technical data

tesa® 88026 specifications
BackingPE foam
AdhesiveAcrylic
Foam thickness mm2.6
Product designRemovable HDPE liner

Values are taken from the tesa product information sheet and are typical averages, not a specification.

Features

  • outstanding foam quality
  • ensures excellent print quality, especially in combination with thinner printing plates
  • It provides long-term resilience and outstanding resistance against water and solvents

Application fields

Compressible substructure for post-print printing plates.

Availability in Malaysia

tesa® 88026 is supplied in Malaysia by Fortis Industrial Sdn Bhd, the sole Malaysian distributor of tesa® tapes for the printing and packaging industry. To quote, send us article number 88026, your press, the plate thickness and the widths you run — we reply within one working day (Mon–Fri 9:00–18:00 MYT) with stock position and pricing.

Use the form on this page, WhatsApp +60 12-353 8820 or call (603) 8073 2667.

tesa® product information disclaimer

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Other hardness in this series

Same construction as tesa® 88026 in the other foam hardness grades — pick by what you print.

CallWhatsAppQuote